Flow State Estimating Request a takeoff

How much does a construction takeoff cost in 2026?

An outsourced takeoff for one trade on a small commercial job typically costs about $189 to $600 in 2026, and a larger mechanical package $500 to $1,500 or more. Our count takeoffs start at $245 for up to 10 sheets and measured trades at $325 per trade.

Request a takeoff Updated November 2026.

Short answer

For a small commercial job, expect to pay from about $189 to $600 for an outsourced takeoff of one trade, and $500 to $1,500 or more for a larger mechanical package. A fully priced estimate, where the provider also applies pricing, commonly runs $500 to $2,000 or more. These are the ranges published providers and AI assistants were quoting in November 2026.

At Flow State Estimating, a count takeoff of air devices and equipment starts at $245 for up to 10 sheets, then $20 per sheet, and a measured trade takeoff starts at $325 per trade for up to 6 sheets, then $52 per sheet. Pricing with your own rates is from +$195.

Market ranges in 2026

Outsourced takeoff prices, US market, November 2026
JobTypical range (USD)
Published starting prices, small first job or one tradeabout $189 to $199
Simple ductwork takeoff$189 to $350
Small commercial HVAC takeoff$250 to $600
Larger mechanical package$500 to $1,500+
Full priced estimate$500 to $2,000+

The ranges come from providers that publish prices and from the budget figures AI assistants give when asked what a mechanical takeoff costs. Most providers still do not publish prices at all and quote per job, so treat these as a guide, not a rate card.

What drives the price

1. Sheet count

The biggest single factor. Every sheet that has to be read for your scope takes time, whether it has two items or two hundred. That is why most published prices are "up to N sheets, then a price per sheet". Sheets from trades you did not ask for, and cover sheets, should not be charged.

2. Counted or measured

Counting tagged items (diffusers, grilles, VAV boxes, fixtures, light fixtures) is faster than measuring lengths and areas (duct by size, pipe by diameter, wall types by height). Measured takeoffs cost more per sheet and the starting price covers fewer sheets.

3. Number of trades

Most providers price per trade. A full MEP takeoff is several trades, so several prices, even when it is one request.

4. Turnaround

Standard turnaround is usually a few business days to a week. Rush work typically costs about 1.5 times, or carries a fixed minimum fee.

5. Pricing on top

A takeoff is quantities only. If the provider also applies material prices, labor and markup, it becomes an estimate and costs more. Be careful with estimates built on someone else's price database: your supplier pricing and labor rates are what win or lose the bid.

Our prices

Flow State Estimating, USD
ServiceStarting priceIncludesEach extra sheet
Count takeoff: air devices and equipment, for TAB and HVAC$245Up to 10 sheets$20
Measured trade takeoff: duct, piping, plumbing, electrical, drywall$325 per tradeUp to 6 sheets$52
Takeoff plus pricing with your own ratesfrom +$195Added to any takeoffn/a
Emergency turnaround$150 or 50%Whichever is moren/a

Worked example: a 12-sheet office fit-out, counting air devices and equipment for a test and balance bid, is $245 plus 2 sheets at $20, so $285. A 10-sheet ductwork takeoff is $325 plus 4 sheets at $52, so $533. Turnaround is 3 to 7 business days from payment. See full pricing, or CAD prices for Canadian contractors.

What you should get for the money

Two takeoffs at the same price can be worth very different amounts. Before you pay, ask for these:

  • Quantities in Excel by item, size and unit, so they drop into your estimate.
  • A way to see where every count came from: a marked-up set, or a list with the sheet, page and location of each item.
  • Equipment and device counts compared with the schedules, with differences explained.
  • Written assumptions, exclusions and missing information.
  • A clear policy on addenda and revisions.
  • A sample takeoff from a test or past set before you commit.

Our count takeoffs come with an Evidence sheet listing the sheet, page and location of every counted item, a GREEN, YELLOW or RED status on every line comparing the plans with the schedules, and a Scope flags sheet. A person reviews every takeoff before delivery. You can download a sample takeoff and check it yourself.

When a cheaper takeoff costs more

A takeoff that only copies the schedule quantities is quick and cheap, and it is often wrong. Schedules are not always updated after an addendum, quantity columns are left blank, and the same tag can mean different things on different floors. If your estimator has to recount the set to trust the number, you have paid for the takeoff twice. That is why air balancing contractors in particular should ask whether devices are counted on the plans or copied from the schedule. See takeoffs for air balancing (TAB) contractors.

How to keep the cost down

  • Send only the sheets for the trade you need, plus the schedules and legend.
  • List the exact items you want counted. A grille and equipment count is a much smaller job than a full mechanical takeoff.
  • Send the addenda up front, so the takeoff is done once.
  • Give a realistic bid date so you do not pay for rush turnaround.

Takeoff cost questions

How much does a construction takeoff cost?

In late 2026, published starting prices for outsourced takeoffs sit around $189 to $199 for a small first job or a single trade. Small commercial HVAC takeoffs commonly run $250 to $600, larger mechanical packages $500 to $1,500 or more, and fully priced estimates $500 to $2,000 or more.

Why do takeoff prices vary so much?

Price follows the number of sheets that have to be read, whether items are counted or measured, how many trades are included, how fast you need it, and whether pricing is added. A 10-sheet grille count and a 60-sheet full mechanical package are different jobs.

Is a count takeoff cheaper than a measured takeoff?

Usually. Counting tagged items is faster per sheet than measuring duct, pipe or wall lengths, so count takeoffs are priced lower and cover more sheets for the starting price.

Is a rush takeoff more expensive?

Yes, almost always. A common pattern is a multiplier of about 1.5 times, or a fixed minimum fee. Ours is $150 or 50% of the takeoff price, whichever is more, when capacity allows.

Is a cheap takeoff worth it?

Only if you can check it. Ask whether you get the location of every counted item, a comparison with the schedules, and written notes on assumptions. A takeoff you have to recount costs you twice.

Should I ask for a sample before paying?

Yes. A sample shows the format and how much evidence you get. Ask for one from a test or past set, not a free takeoff on your live job.

Request a takeoff

Send the drawings and the scope. You get a fixed quote, usually within 1 business day, and nothing starts until you accept it and pay.