Flow State Estimating Request a takeoff

HVAC and ductwork takeoff services

We count every air device and piece of HVAC equipment on your mechanical drawings and measure ductwork by size and system. Air device and equipment counts start at $245 for up to 10 sheets; ductwork takeoffs start at $325 for up to 6 sheets.

Request a takeoff Fixed quote before any work starts.
Takeoff summary, HVACExample layout
TagItemSizeQtyChecked
SD-1Supply diffuser24x2486✓
RG-1Return grille24x1241✓
VAVVAV box with reheat8 in22✓
FDFire dampervaries34✓
DUCTRectangular supply duct24x121,024 LF✓
DUCTRound spiral duct10 in460 LF✓
FLEXFlexible duct8 in310 LF✓
Your takeoff follows the tags on your drawings and can be laid out in your own template.

What an HVAC takeoff includes

Tell us which of these you need. You can ask for the full mechanical set or a single item, like a grille count.

  • Rectangular and round duct

    Linear feet by size and system, split into supply, return, exhaust and outside air.

  • Duct fittings

    Elbows, tees, transitions, offsets, taps and end caps, counted by type and size.

  • Grilles, registers and diffusers

    Every air terminal counted by tag, size and neck, matched to the schedule.

  • Dampers and accessories

    Volume, fire and smoke dampers, access doors, flex connections and louvers.

  • HVAC equipment

    RTUs, AHUs, VAV boxes, fans, unit heaters and split systems, checked against the equipment schedules.

  • Insulation and liner

    Duct wrap and acoustic liner by size and length, where the specs call for it.

What every count takeoff includes

Air devices and HVAC equipment are counted by our takeoff engine and reviewed by a person. This is what that part of an HVAC takeoff contains.

  • Excel workbook

    Summary, Takeoff, Evidence, By category, Scope flags and Sheet index tabs, ready to paste into your estimate.

  • Every line by tag

    Each line shows the tag, description, schedule quantity, plan count and the final quantity.

  • Evidence sheet

    The sheet, page and location of every counted item, so any number can be checked in seconds.

  • Schedule vs plan reconciliation

    Each line is GREEN when the schedule and the plans agree, YELLOW when they differ a little, RED when they do not match.

  • Scope flags and open questions

    Notes such as an addendum referenced, equipment to be replaced or existing work to remain, worth raising as RFIs before you bid.

  • Reviewed by a person

    The file stays marked DRAFT until every red line has been reviewed. A person reviews every takeoff before delivery.

A PDF summary report comes with the workbook. See a sample takeoff.

A duct takeoff your estimator can trust

A ductwork takeoff is only useful if the numbers hold up when the job is built. Our HVAC takeoffs follow the tags and sizes on your mechanical drawings, sheet by sheet, and are checked against the schedules and specs before they go out.

Where the plans and the schedule disagree, or a run is drawn without a size, you get a written note instead of a guess. Your estimator keeps full control of pricing and labor. We supply the quantities that HVAC estimating depends on.

Two parts, two prices

An HVAC takeoff has a counting part and a measuring part, and they are priced separately because the work is different.

Air devices and equipment: counted

Supply diffusers, return and exhaust grilles, VAV and terminal units, fans, rooftop units, air handlers, ERVs, fan coils and heat pumps are counted by tag. Our takeoff engine locates each one on the plans, compares the plan count with the schedule and marks the line GREEN, YELLOW or RED. The Evidence sheet lists the sheet, page and location of every counted item. A person reviews every line that is not GREEN before delivery. This is a count takeoff, from $245 for up to 10 sheets.

Ductwork: measured

Rectangular and round duct by size and system, fittings, dampers, insulation and liner are measured in Bluebeam by an estimator. This is a measured trade takeoff, from $325 for up to 6 sheets, then $52 per sheet. If you only need part of it, such as duct by size without fittings, say so and the quote covers just that.

Common HVAC takeoff requests

  • A grille and diffuser count for a controls or air balancing bid: see air balancing (TAB) takeoffs.
  • An equipment list checked against the schedules for an equipment supplier or a mechanical sub.
  • Duct by size and gauge for a sheet metal shop pricing fabrication.
  • The full HVAC scope, counted and measured, for a mechanical contractor's bid.

What to send

The mechanical drawings as PDF, including schedules, details and the legend, plus the HVAC spec sections and any addenda. Large sets can be shared as a link. Tell us which items you want counted or measured and your bid due date.

Pricing

  • Count takeoff (air devices and equipment, for TAB and HVAC): from $245 up to 10 sheets, then $20 per sheet.
  • Measured trade takeoff (duct, piping, plumbing, electrical, drywall): from $325 per trade up to 6 sheets, then $52 per sheet.
  • Takeoff plus pricing with your own rates: from +$195.

Turnaround is 3 to 7 business days from payment. Emergency turnaround on request when capacity allows: $150 or 50% of the takeoff price, whichever is more.

How it works

  1. Send your drawings

    Use the request form or email a link to the set. PDF drawings, schedules, specs and addenda.

  2. We reply with a fixed quote

    A fixed price and delivery window for the scope you asked for, usually within 1 business day.

  3. Accept and pay in full

    Pay by card payment link, or by Interac e-Transfer in Canada. Payment is in full, before work starts.

  4. Work starts

    The clock starts when payment is received. Questions about the drawings come to you by email.

  5. Delivery in 3 to 7 business days

    Depending on sheet count and scope. A person reviews every takeoff before it is sent.

HVAC takeoff questions

What is included in an HVAC takeoff?

Air devices and HVAC equipment counted by tag and checked against the schedules, and, if you ask for it, ductwork by size and system with fittings, dampers, insulation and liner. You choose which of these to include when you request the takeoff.

How much does an HVAC takeoff cost?

Air devices and equipment are a count takeoff, from $245 USD for up to 10 sheets, then $20 per sheet. Ductwork is a measured takeoff, from $325 for up to 6 sheets, then $52 per sheet.

Can you count only grilles and diffusers?

Yes. Air balancing and controls contractors often need only the air terminals and equipment counted. List the items you want in the request and the quote will cover just those.

Do you price the HVAC estimate?

If you want it, as an add-on from +$195: we apply your own material prices, labor units and markup. Otherwise you get quantities organized so your estimator can price them.

Do you check the counts against the equipment schedule?

Yes. Every counted tag shows the schedule quantity next to the plan count, and the line is GREEN only when they agree. Differences are marked YELLOW or RED with the reason.

What do you need to start an HVAC takeoff?

The mechanical drawings as PDFs, including schedules and details, plus the relevant spec sections and any addenda.

How long does an HVAC takeoff take?

3 to 7 business days depending on sheet count and scope, counted from when payment is received. Emergency turnaround is available on request when capacity allows.

Request a takeoff

Send the drawings and the scope. You get a fixed quote, usually within 1 business day, and nothing starts until you accept it and pay.