Plumbing takeoff services
We count fixtures and measure domestic water, sanitary, vent and storm piping from your plumbing drawings, checked against the fixture schedule and risers. Plumbing takeoffs start at $325 for up to 6 sheets, then $52 per sheet, in Excel within 3 to 7 business days.
| Tag | Item | Size | Qty | Checked |
|---|---|---|---|---|
| WC-1 | Water closet, floor mount | 24 | ✓ | |
| L-1 | Lavatory | 18 | ✓ | |
| FD-1 | Floor drain | 3 in | 31 | ✓ |
| CO | Cleanout | varies | 22 | ✓ |
| DCW | Domestic cold water | 3/4 in | 870 LF | ✓ |
| SAN | Sanitary pipe | 4 in | 540 LF | ✓ |
| WH-1 | Water heater | sched. | 2 | ✓ |
What a plumbing takeoff includes
Quantities can be split by floor, by system, or by underground and above ground if that's how you price.
Plumbing fixtures
Water closets, lavatories, sinks, urinals, showers and drinking fountains, counted by tag.
Domestic water piping
Cold, hot and recirculation piping by size and material.
Sanitary, waste and vent
Drainage and vent piping by size, with fittings.
Storm drainage
Roof drains, leaders and storm piping.
Valves and specialties
Isolation valves, backflow preventers, mixing valves, hose bibbs and trap primers.
Plumbing equipment
Water heaters, pumps, tanks and interceptors, checked against the schedules.
What you get with a plumbing takeoff
Plumbing takeoffs are measured in Bluebeam by an estimator and quoted per job.
Excel by item, size and unit
Every line has the item, the size or type, the quantity and the unit, ready to paste into your estimate or your own template.
Measured in Bluebeam by an estimator
Lengths and areas are measured by hand in Bluebeam by an estimator, not guessed from a rule of thumb. You also get the Bluebeam markup PDF, so you can see what was measured on each sheet.
Counts checked against the schedules
Scheduled items are counted on the plans and compared with the schedule, and differences are noted.
Organized the way you price
By floor, area, system or phase. Tell us in the request and the takeoff is grouped that way.
Notes on assumptions and open questions
Anything the drawings leave unclear is written down, so you can raise it as an RFI or carry an allowance.
Reviewed by a person
Every takeoff is reviewed by a person before delivery.
Count takeoffs of air devices and equipment also come with an Evidence sheet and GREEN, YELLOW and RED reconciliation. See a sample takeoff.
Plumbing counts that match the fixture schedule
A plumbing takeoff has to agree with the fixture schedule, the riser diagrams and the plans at the same time. We count from all three and flag the places where they don't line up.
You get fixtures by tag, piping by size and system, and a list of open questions to send to the designer before bid day. Pricing and labor stay with your estimator, unless you ask us to apply your rates.
How a plumbing takeoff is put together
Fixtures first
Fixtures are counted by tag on the floor plans and compared with the fixture schedule. Where a fixture appears on the plans and not on the schedule, or the schedule calls for more than are drawn, the difference is noted with the sheet it came from.
Piping by system and size
Domestic cold, hot and recirculation piping, sanitary, waste and vent, and storm drainage are measured in Bluebeam by an estimator, by size and material, with fittings where you want them. Risers are taken from the riser diagrams and checked against the plans.
Split the way you price
Underground and above ground, by floor, by system or by phase. Ask for the breakdown you price by and the takeoff is organized that way.
Plumbing equipment
Water heaters, pumps, tanks and interceptors are counted and checked against the schedules. Equipment that sits on the plumbing sheets but serves the mechanical system, such as boilers and pumps, is counted on the plumbing sheets, and HVAC tags that are only repeated there are not counted twice.
Common plumbing takeoff requests
- A fixture count by tag for a fixture supplier quote or a washroom renovation.
- Underground sanitary and storm piping, split from above ground, for an early bid package.
- Domestic water piping by size and material for a repipe.
What to send
The plumbing drawings as PDFs, including fixture schedules and riser diagrams, plus the plumbing spec sections and any addenda. Large sets can be shared as a link.
Pricing
- Measured trade takeoff (duct, piping, plumbing, electrical, drywall): from $325 per trade up to 6 sheets, then $52 per sheet.
- Takeoff plus pricing with your own rates: from +$195.
- Firms sending 10 or more jobs a month: monthly plans, ask.
Turnaround is 3 to 7 business days from payment. Emergency turnaround on request when capacity allows: $150 or 50% of the takeoff price, whichever is more.
How it works
Send your drawings
Use the request form or email a link to the set. PDF drawings, schedules, specs and addenda.
We reply with a fixed quote
A fixed price and delivery window for the scope you asked for, usually within 1 business day.
Accept and pay in full
Pay by card payment link, or by Interac e-Transfer in Canada. Payment is in full, before work starts.
Work starts
The clock starts when payment is received. Questions about the drawings come to you by email.
Delivery in 3 to 7 business days
Depending on sheet count and scope. A person reviews every takeoff before it is sent.
Plumbing takeoff questions
What is included in a plumbing takeoff?
Fixtures, domestic water piping, sanitary, waste and vent piping, storm drainage, valves and specialties, and plumbing equipment. You choose the scope when you request the takeoff.
How much does a plumbing takeoff cost?
A plumbing takeoff is a measured trade takeoff, from $325 USD for up to 6 sheets, then $52 per sheet. You get a fixed quote before any work starts.
Can quantities be split by underground and above ground?
Yes. Ask for the breakdown you price by, such as underground and above ground, by floor, or by system, and the takeoff will be organized that way.
Do you provide a priced plumbing estimate?
If you want one, as an add-on from +$195: we apply your own material prices, labor units and markup. Otherwise the takeoff gives your estimator the quantities to price.
Do you check fixtures against the fixture schedule?
Yes. Fixtures are counted on the plans and compared with the fixture schedule and the risers. Differences are written up as open questions.
What do you need to start a plumbing takeoff?
The plumbing drawings as PDFs, including fixture schedules and riser diagrams, plus the plumbing spec sections and any addenda.
How long does a plumbing takeoff take?
3 to 7 business days depending on sheet count and scope, counted from when payment is received.
Request a takeoff
Send the drawings and the scope. You get a fixed quote, usually within 1 business day, and nothing starts until you accept it and pay.