Flow State Estimating Request a takeoff

Mechanical and MEP Estimating Services

We take off piping, equipment and ductwork from your mechanical drawings, and plumbing, electrical and fire protection for a full MEP bid. Equipment counts start at $245 for up to 10 sheets; measured trades start at $325 per trade for up to 6 sheets.

Request a takeoff Fixed quote before any work starts.
Takeoff summary, pipingExample layout
TagItemSizeQtyChecked
HWS/RHeating water supply and return2 in640 LF✓
CHWChilled water pipe4 in380 LF✓
GASGas pipe1-1/4 in215 LF✓
REFRefrigerant line set7/8 in290 LF✓
VLVIsolation valvevaries58✓
P-1Circulating pumpsched.4✓
B-1Boilersched.2✓
Your takeoff follows the tags on your drawings and can be laid out in your own template.

What a mechanical takeoff includes

Mechanical scopes can be quoted on their own or together with plumbing, electrical and fire protection for a full MEP bid.

  • Hydronic piping

    Heating water, chilled water and condenser water piping by size and material.

  • Refrigerant and gas piping

    Line sets, gas runs and regulators, measured by size.

  • Valves and specialties

    Isolation, balancing and control valves, strainers, air separators and expansion tanks.

  • Mechanical equipment

    Boilers, chillers, pumps, air handlers and heat exchangers, checked against the schedules.

  • Fittings and hangers

    Elbows, tees, reducers and flanges, plus hangers and supports where they are detailed.

  • Pipe insulation

    Insulation by pipe size and service, following the spec.

Piping takeoffs for mechanical and MEP bids

Mechanical estimating starts with a count you can stand behind. We take off piping, valves and equipment from your mechanical drawings and check every item against the schedules, details and spec sections.

The result is a piping takeoff organized by system and size, with notes on anything the drawings leave open. It drops into your own estimating spreadsheet or software, so your team spends bid week on pricing instead of counting.

Equipment counts with evidence

Mechanical equipment is where a schedule and a set of plans most often disagree. A unit is added in an addendum, a tag is reused on another floor, a pump appears on the plumbing sheets but not the mechanical schedule. Our takeoff engine counts equipment once per tag per floor, compares it with the schedules and marks each line GREEN, YELLOW or RED with the reason. Equipment drawn on plumbing sheets, such as boilers, pumps and tanks, is counted there; HVAC tags repeated on a plumbing sheet are not counted twice. The Evidence sheet lists the sheet, page and location of every counted item, and a person reviews every takeoff before delivery.

Full MEP takeoffs

Mechanical, plumbing, electrical and fire protection can be taken off together and quoted as one job. Each measured trade is priced separately, from $325 per trade for up to 6 sheets, then $52 per sheet, and the counts are priced as a count takeoff. One request, one quote, one delivery date.

Spec sections

Categories are mapped to MasterFormat Division 23 sections and to the older Division 15 numbers, so the takeoff lines up with whichever spec your project uses. Scope notes found on the drawings, such as an addendum referenced, equipment to be replaced or existing work to remain, are listed on their own sheet so you can raise them before bid day.

What to send

The mechanical drawing set as PDFs with schedules and details, the mechanical spec sections and every addendum issued so far. For a full MEP bid, include the plumbing, electrical and fire protection sheets too.

What every count takeoff includes

Mechanical equipment and air devices are counted by our takeoff engine and reviewed by a person. Piping and ductwork are measured in Bluebeam by an estimator.

  • Excel workbook

    Summary, Takeoff, Evidence, By category, Scope flags and Sheet index tabs, ready to paste into your estimate.

  • Every line by tag

    Each line shows the tag, description, schedule quantity, plan count and the final quantity.

  • Evidence sheet

    The sheet, page and location of every counted item, so any number can be checked in seconds.

  • Schedule vs plan reconciliation

    Each line is GREEN when the schedule and the plans agree, YELLOW when they differ a little, RED when they do not match.

  • Scope flags and open questions

    Notes such as an addendum referenced, equipment to be replaced or existing work to remain, worth raising as RFIs before you bid.

  • Reviewed by a person

    The file stays marked DRAFT until every red line has been reviewed. A person reviews every takeoff before delivery.

A PDF summary report comes with the workbook. See a sample takeoff.

Pricing

  • Count takeoff (air devices and equipment, for TAB and HVAC): from $245 up to 10 sheets, then $20 per sheet.
  • Measured trade takeoff (duct, piping, plumbing, electrical, drywall): from $325 per trade up to 6 sheets, then $52 per sheet.
  • Takeoff plus pricing with your own rates: from +$195.

Turnaround is 3 to 7 business days from payment. Emergency turnaround on request when capacity allows: $150 or 50% of the takeoff price, whichever is more.

How it works

  1. Send your drawings

    Use the request form or email a link to the set. PDF drawings, schedules, specs and addenda.

  2. We reply with a fixed quote

    A fixed price and delivery window for the scope you asked for, usually within 1 business day.

  3. Accept and pay in full

    Pay by card payment link, or by Interac e-Transfer in Canada. Payment is in full, before work starts.

  4. Work starts

    The clock starts when payment is received. Questions about the drawings come to you by email.

  5. Delivery in 3 to 7 business days

    Depending on sheet count and scope. A person reviews every takeoff before it is sent.

Mechanical estimating questions

Is this a full mechanical estimate?

It is the quantity side of the estimate. We deliver the takeoff, and your estimator applies material pricing, labor and markup. If you want a priced sheet, we can apply your own rates as an add-on from +$195.

How much do mechanical estimating services cost?

Equipment and air device counts start at $245 USD for up to 10 sheets, then $20 per sheet. Measured trades such as piping and ductwork start at $325 per trade for up to 6 sheets, then $52 per sheet.

Do you handle full MEP takeoffs?

Yes. Mechanical, plumbing, electrical and fire protection can be taken off together and quoted as one job.

Do you count equipment against the schedules?

Yes. Each tag shows the schedule quantity next to the plan count, with a GREEN, YELLOW or RED status and the reason when they differ.

What kinds of projects do you take on?

Commercial, institutional, industrial and residential work, both new construction and renovation.

What do you need to start?

The mechanical drawing set as PDFs with schedules and details, the mechanical spec sections, and any addenda issued so far.

How long does a mechanical takeoff take?

3 to 7 business days depending on sheet count and scope, counted from when payment is received.

Request a takeoff

Send the drawings and the scope. You get a fixed quote, usually within 1 business day, and nothing starts until you accept it and pay.